$ ssh root@192.168.1.105 The authenticity of host '192.168.1.105 (192.168.1.105)' can't be established. RSA key fingerprint is 2e:e7:1f:83:8a:50:b9:e0:29:f4:1a:31:8b:ea:44:ed. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '192.168.1.105' (RSA) to the list of known hosts. root@192.168.1.105's password: root@om-gta02:~# wget http://pkg-fso.alioth.debian.org/freerunner/install.sh Connecting to pkg-fso.alioth.debian.org (217.196.43.134:80) install.sh 100% |*******************************| 17832 00:00:00 ETA root@om-gta02:~# root@om-gta02:~# chmod +x install.sh root@om-gta02:~# HOSTNAME=mizzit INST_MIRROR=http://ftp.us.debian.org/debian SD_ PART1_FS=vfat ./install.sh all Running stage all I: Running all stages with these settings: I: hostname set to mizzit I: microSD card device at /dev/mmcblk0 I: vfat as filesystem for the first microSD card partition I: installing into /mnt/debian I: using Debian mirror at http://ftp.us.debian.org/debian I: APT recommends set to false Running stage testing Testing system setup * microSD card device: /dev/mmcblk0 present * wget installed * ping installed * fdisk installed * mount installed * umount installed * mkfs.ext2 installed * gunzip installed * dd installed * sed installed * rdate installed W: Could not find mkfs.vfat binary Downloading dosfstools package Connecting to ftp2.de.debian.org (195.71.9.196:80) dosfstools.deb 100% |*******************************| 81072 00:00:00 ETA * mkfs.vfat installed * network running I: System setup looks good I: Done with stage testing Running stage time Fetching time from ntp.fu-berlin.de with rdate I: Time is now Sat Aug 16 02:30:29 UTC 2008 I: Done with stage time Running stage partition Starting to partition the microSD card *********** * WARNING * *********** This will destroy all the data on the microSD card!!! Press any key within 5 seconds to quit 1+0 records in 1+0 records out Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that the previous content won't be recoverable. The number of cylinders for this disk is set to 61440. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): Command action e extended p primary partition (1-4) Partition number (1-4): First cylinder (1-61440, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-61440, default 61440): Command (m for help): Selected partition 1 Hex code (type L to list codes): Changed system type of partition 1 to b (Win95 FAT32) Command (m for help): Command action e extended p primary partition (1-4) Partition number (1-4): First cylinder (246-61440, default 246): Using default value 246 Last cylinder or +size or +sizeM or +sizeK (246-61440, default 61440): Using default value 61440 Command (m for help): The partition table has been altered! Calling ioctl() to re-read partition table root@om-gta02:~# ls Screenshot-1.png install.sh pup root@om-gta02:~# ls al /mnt ls: al: No such file or directory /mnt: card cf net ram root@om-gta02:~# ls al /mnt/card ls: al: No such file or directory /mnt/card: root@om-gta02:~# mount rootfs on / type rootfs (rw) /dev/root on / type jffs2 (rw,noatime) proc on /proc type proc (rw) tmpfs on /mnt/.exquisite type tmpfs (rw) tmpfs on /mnt/.psplash type tmpfs (rw) sysfs on /sys type sysfs (rw) /dev/root on /dev/.static/dev type jffs2 (rw) udev on /dev type tmpfs (rw) /dev/mmcblk0 on /media/mmcblk0 type ext3 (rw,sync,data=ordered) tmpfs on /var/volatile type tmpfs (rw) tmpfs on /dev/shm type tmpfs (rw) devpts on /dev/pts type devpts (rw) root@om-gta02:~# ls -al /media drwxr-xr-x 12 root root 0 Aug 12 12:20 . drwxr-xr-x 17 root root 0 Jul 6 04:04 .. ---------x 1 root root 0 May 9 05:32 .hal-mtab-lock drwxr-xr-x 2 root root 0 Jan 1 1970 card drwxr-xr-x 2 root root 0 Aug 1 23:05 cf drwxr-xr-x 2 root root 0 Aug 1 23:05 hdd drwxr-xr-x 2 root root 0 Aug 1 23:05 mmc1 drwxr-xr-x 20 1000 1000 4096 Apr 4 17:28 mmcblk0 drwxr-xr-x 2 root root 0 Aug 9 13:25 mmcblk0p2 drwxr-xr-x 2 root root 0 Aug 1 23:05 net drwxr-xr-x 2 root root 0 Aug 1 23:05 ram drwxr-xr-x 2 root root 0 Aug 1 23:05 realroot drwxr-xr-x 2 root root 0 Aug 1 23:05 union root@om-gta02:~# ls -al /media/mmcblk0 drwxr-xr-x 20 1000 1000 4096 Apr 4 17:28 . drwxr-xr-x 12 root root 0 Aug 12 12:20 .. drwxr-xr-x 2 1000 1000 4096 Mar 29 22:24 bin drwxr-xr-x 2 1000 1000 4096 Mar 11 11:20 boot drwxr-xr-x 4 1000 1000 4096 Mar 29 22:38 dev drwxr-xr-x 65 1000 1000 4096 Jun 4 06:49 etc drwxr-xr-x 3 1000 1000 4096 Mar 29 21:58 home drwxr-xr-x 13 1000 1000 4096 Jun 4 06:21 lib drwx------ 2 root root 16384 Apr 4 15:20 lost+found drwxr-xr-x 2 root root 4096 Mar 29 21:18 media drwxr-xr-x 2 1000 1000 4096 Mar 11 11:20 mnt drwxr-xr-x 2 root root 4096 Mar 29 21:18 opt drwxr-xr-x 2 1000 1000 4096 Mar 11 11:20 proc drwxr-xr-x 2 1000 1000 4096 Jun 4 06:49 root drwxr-xr-x 2 1000 1000 4096 Mar 29 22:27 sbin drwxr-xr-x 2 root root 4096 Mar 29 21:18 srv drwxr-xr-x 2 1000 1000 4096 Mar 26 19:52 sys drwxr-xr-x 4 1000 1000 4096 Mar 29 22:54 tmp drwxr-xr-x 11 1000 1000 4096 Mar 29 21:46 usr drwxr-xr-x 13 1000 1000 4096 Mar 29 21:18 var root@om-gta02:~# ls -al /media/mmcblk0p2 drwxr-xr-x 2 root root 0 Aug 9 13:25 . drwxr-xr-x 12 root root 0 Aug 12 12:20 .. root@om-gta02:~# HOSTNAME=mizzit INST_MIRROR=http://ftp.us.debian.org/debian SD_ PART1_FS=vfat ./install.sh partition Running stage partition Starting to partition the microSD card *********** * WARNING * *********** This will destroy all the data on the microSD card!!! Press any key within 5 seconds to quit 1+0 records in 1+0 records out Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that the previous content won't be recoverable. The number of cylinders for this disk is set to 61440. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): Command action e extended p primary partition (1-4) Partition number (1-4): First cylinder (1-61440, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-61440, default 61440): Command (m for help): Selected partition 1 Hex code (type L to list codes): Changed system type of partition 1 to b (Win95 FAT32) Command (m for help): Command action e extended p primary partition (1-4) Partition number (1-4): First cylinder (246-61440, default 246): Using default value 246 Last cylinder or +size or +sizeM or +sizeK (246-61440, default 61440): Using default value 61440 Command (m for help): The partition table has been altered! Calling ioctl() to re-read partition table root@om-gta02:~# HOSTNAME=mizzit INST_MIRROR=http://ftp.us.debian.org/debian SD_ PART1_FS=vfat ./install.sh mount Running stage mount Mounting the newly created system mount: special device /dev/mmcblk0p2 does not exist root@om-gta02:~# mount rootfs on / type rootfs (rw) /dev/root on / type jffs2 (rw,noatime) proc on /proc type proc (rw) tmpfs on /mnt/.exquisite type tmpfs (rw) tmpfs on /mnt/.psplash type tmpfs (rw) sysfs on /sys type sysfs (rw) /dev/root on /dev/.static/dev type jffs2 (rw) udev on /dev type tmpfs (rw) /dev/mmcblk0 on /media/mmcblk0 type ext3 (rw,sync,data=ordered) tmpfs on /var/volatile type tmpfs (rw) tmpfs on /dev/shm type tmpfs (rw) devpts on /dev/pts type devpts (rw) root@om-gta02:~# umount /dev/mmcblk0 root@om-gta02:~# HOSTNAME=mizzit INST_MIRROR=http://ftp.us.debian.org/debian SD_ PART1_FS=vfat ./install.sh mount Running stage mount Mounting the newly created system mount: special device /dev/mmcblk0p2 does not exist root@om-gta02:~# mount rootfs on / type rootfs (rw) /dev/root on / type jffs2 (rw,noatime) proc on /proc type proc (rw) tmpfs on /mnt/.exquisite type tmpfs (rw) tmpfs on /mnt/.psplash type tmpfs (rw) sysfs on /sys type sysfs (rw) /dev/root on /dev/.static/dev type jffs2 (rw) udev on /dev type tmpfs (rw) tmpfs on /var/volatile type tmpfs (rw) tmpfs on /dev/shm type tmpfs (rw) devpts on /dev/pts type devpts (rw) root@om-gta02:~# HOSTNAME=mizzit INST_MIRROR=http://ftp.us.debian.org/debian SD_ PART1_FS=vfat ./install.sh partition Running stage partition Starting to partition the microSD card *********** * WARNING * *********** This will destroy all the data on the microSD card!!! Press any key within 5 seconds to quit 1+0 records in 1+0 records out Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that the previous content won't be recoverable. The number of cylinders for this disk is set to 61440. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): Command action e extended p primary partition (1-4) Partition number (1-4): First cylinder (1-61440, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-61440, default 61440): Command (m for help): Selected partition 1 Hex code (type L to list codes): Changed system type of partition 1 to b (Win95 FAT32) Command (m for help): Command action e extended p primary partition (1-4) Partition number (1-4): First cylinder (246-61440, default 246): Using default value 246 Last cylinder or +size or +sizeM or +sizeK (246-61440, default 61440): Using default value 61440 Command (m for help): The partition table has been altered! Calling ioctl() to re-read partition table * Waiting for partitions to appear * Partition table created * Formatting the microSD card partitions mkfs.vfat 2.11 (12 Mar 2005) mke2fs 1.38 (30-Jun-2005) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 244800 inodes, 489560 blocks 24478 blocks (5.00%) reserved for the super user First data block=0 15 block groups 32768 blocks per group, 32768 fragments per group 16320 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912 Writing inode tables: done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 28 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. I: microSD card ready I: Done with stage partition root@om-gta02:~# HOSTNAME=mizzit INST_MIRROR=http://ftp.us.debian.org/debian SD_ PART1_FS=vfat ./install.sh mount Running stage mount Mounting the newly created system I: microSD card partitions mounted I: Done with stage mount root@om-gta02:~#